The method: In a small bowl, mix 3 to 4 tablespoons of baking soda, 1 tablespoon of dish soap (I used Dawn), and 1 to 2 tablespoons of hydrogen peroxide. Spread the mixture over the stain and let it sit overnight. Rinse and scrub with warm, soapy water.Sep 17, 2020
Polypropylene Resin (our white and grey “Plastic” chair styles) can be washed and cleaned with a mild abrasive like Ajax or even just a slight paste-like mixture of baking soda and water. The “pebbled” surface can easily handle the slightly abrasive action of these types of cleaners.
Place a cup of baking powder onto the board, and then pour a cup of white vinegar over the entire board. Allow it to sit for a few minutes, and then give it a good rinse. This should remove any stains as well.
Bleach will safely sanitize the board and can even remove surface stains, making your boards look better as well. White cutting boards are particularly susceptible to stains, and bleach is great at freshening them up.
White plastic turns yellow over time due to a chemical reaction that occurs when it is exposed to light, oils, etc. … If your plastic turned yellow from bleach or food coloring, those are actually dye stains.
Soak the plastic item in a small bucket filled with vinegar for five minutes. If the cloudiness continues, sprinkle the item liberally with a layer of baking soda and immerse it in the vinegar bath. This should dissolve the film that clings to the plastic and creates that cloud.
Mix one part white vinegar to four parts water (or you can use hydrogen peroxide) and soak your cutting board in the solution for a few minutes, then rinse off and dry. Do not soak the board overnight or even an hour because of stubborn stains.
Disinfect with 3 Percent Hydrogen Peroxide
Pour the hydrogen peroxide over the board and distribute it all over the board with a clean sponge. Let it stand for a few minutes as it fizzes and kills germs, and then wipe it off with the clean sponge.
To deodorize your cutting board, all you need is salt and a lemon! Massage 1/3 cup of coarse salt on your cutting board, and then let it sit for about 10 minutes. Then, massage the salt with 1/2 a lemon, squeezing the lemon to release the juice. Last, simply rinse the board with a clean cloth and hot water.
Pour Hydrogen Peroxide Onto Cutting Board Surface
Hydrogen peroxide will safely and effectively disinfect the surface of a wood cutting board.
The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode.
Vinegar is good at removing grease, mildew, and hard water stains as well as disinfecting hard surfaces. Wipe the plastic. Use a clean cloth or sponge to wipe the vinegar solutions around the plastic. Spray more vinegar solution on areas with built up grime, and scrub them liberally until the dirt is removed.
Baking soda not only cleans the plastic but removes the scents of dishes past, often after just one wash. Before working with baking soda, clean the plastic in warm water, not boiling, and dish soap.
You should not use any type of cooking oil on your board, such as olive oil, vegetable oil, or regular coconut oil, because they will go rancid. Also keep in mind that excess moisture is bad for wood. Never soak your cutting board or let it sit in water for extended periods.
The Food and Drug Administration (FDA) classifies hydrogen peroxide as “generally recognized as safe” (GRAS) for humans at low doses. But the FDA warns that getting hydrogen peroxide on your skin may cause irritation, burning, and blistering.
Plastic and wooden cutting boards can be sanitized using a diluted liquid chlorine bleach solution. Combine one teaspoon of bleach to one quart of water, and pour the solution onto the entire surface area of the board, allowing it to sit undisturbed for several minutes. Rinse the board clean with water.
Toothpaste. Toothpaste also works well to clean clear plastic surfaces. Use a white, non-gel toothpaste, rub directly onto the surface, and clean with a rag working in small circular motions. Wipe clean with a damp cloth, and any film or residue will disappear from the plastic, and restore the shiny plastic finish.
When polymers — such as plastics — experience stress, one of the most common reactions is a color change: they turn white at the point of stress. … Heating a polymer can cause the amorphous sections of the chain to crystalize. When that happens, the way the molecules scatter light changes and the plastic turns white.
Two of the most effective substances are lemon juice and ordinary vinegar. Lemon juice is usually the best (and will also leave a lovely smell behind). Stronger pickling vinegar and lime juice are both even more acidic and can be used for really stubborn deposits.
how to clean plastic cutting board with bleach
how to clean plastic cutting board with vinegar
how to clean plastic cutting boards
how to clean plastic cutting board without bleach
cutting board whitener
how to clean plastic cutting board after raw meat
how to clean plastic cutting board with baking soda
how to clean plastic cutting board stains